Tele Radio T60, Installation Instruction

Page: 21 / 56

21
CODE LEARNING (APL & ARL)
Adjustable ID code
1. Enter the ID code that you want to assign to your
transmitter (or more than one transmitter) on the
10-pole transmitter code switch. The receiver will
catch up the same ID code when co-programmed.
2. Press the receiver Function button to
select Code learning (LED 6 lights red).
3. Press any function button on the transmitter (i.e.
up, stop, down) until the red LED flashes 3 times.
Fixed, individual ID code
1. Press the receiver Function button to select Code learning (LED 6
lights red).
2. WITHIN 1 SECOND: Press the receiver Function button again.
3. Press a transmitter function button (i.e. up, stop, down) until the red
LED flashes 3 times.
Erase ID codes
1. Press the receiver Function button for approx. 6 seconds until the red
LED lights up. When the memory is erased, the red LED goes out.
NOTE! All transmitter codes get erased at the same time.