18
Adjustable ID code
1.
Enter the ID code that you want to assign to your transmitter (or
more than one transmitter) on the 10-pole transmitter code switch.
The receiver will catch up the same ID code when co-programmed.
2.
Press the receiver Function button to select Code learning (LED 6
lights red).
3.
Select a number between 000 and 999 that you want to assign to
the communication with the receiver. Enter the number on the
transmitter buttons.
4.
Press any function button on the transmitter (i.e. up, stop, down)
until the red LED flashes 3 times.
Fixed, individual ID code
1.
Press the receiver Function button to select Code learning (LED 6
lights red).
2.
WITHIN 1 SECOND: Press the receiver Function button for more
than 1 second.
3.
Press a transmitter function button (i.e. up, stop, down) until the red
LED flashes 3 times.
Erase ID codes
1. Press the receiver Function button for approx. 6 seconds until the red
LED lights up. When the memory is erased, the red LED goes out.
NOTE! All transmitter codes get erased at the same time.
CODE LEARNING (ADL)
Summary of Contents for T60
