Tele Radio T60, Installation Instruction, Page: 23 / 56

23
T60TX-15DML replaces 401RVL9 and 403RVL9 with knob 0-15
1. Put the transmitter system switch (A) in position 1 (OFF).
2. Put the code switch (B) 9 in -(minus) position.
3. Set code switch 10 either in minus or plus position, depending on
whether you are using A or B coding on the old transmitter (Robust
transmitter).
4. Set codes (identical to the receiver codes) on the transmitter code
switches 1-4 (code switches 5-8 are not used).
5. Make sure that the relay is activated when one of the transmitter
buttons is pressed.
See code table 0-15, Appendix B.
T60TX-15DML replaces a 460-93 transmitter
1. Put the transmitter system switch (A) in position 1 (OFF).
2. Put the code switch (B) 9 in +(plus) position.
3. Set codes (identical to the receiver codes) on the transmitter code
switches 1-3 (code switches 4-8 are not used).
4. Make sure that the relay is activated when one of the transmitter
buttons is pressed.
See code table 460-93, Appendix C.
NOTE!
When you select the door on the T60TX-15DML transmitter, enter a
combination of the first digit and the last two digits, when it works
together with a 460-93 transmitter.
Example: Operate door A2 as in table A: Enter the combination 102
Operate door D3 as in table D: Enter the combination 403