elmeg IP120 / en / elmegIP120_v1 / web_configurator.fm / 01.08.2012
V
e
rsion 2, 27.0
5
.2010
70
elmeg IP120
Teldat
Configuring phone settings via the Web configurator
IPv6 configuration
IP Address Type
¤
Select
Auto Configuration
if your device receives the IP address via a DHCP server.
¤
Select
Static
if your device receives a fixed IP address.
If
Auto Configuration
is selected, all further settings are made automatically. They are displayed
here and cannot be changed.
If you selected
Static
as the address type, you must create the following settings:
IP Address
Enter an IP address for your phone. This IP address allows your phone to be reached by other
subscribers in your local network (e.g., PC).
The IP address comprises 128 bits and is represented by eight blocks of hexadecimal figures
from 0 to FFFFFF that are separated by a colon, e.g., 2001:b021:189:0:205:5dff:fe6b:87.
The IP address comprises a prefix and an interface identifier. The length of the prefix (usually
64 bits) is determined by the
Prefix Length
value.
Prefix Length
The prefix length stipulates how many bits of the IP address are used for the network prefix.
Enter the prefix length that is used in your network.
Preferred DNS Server
Enter the IP address for the preferred DNS server. DNS (Domain Name System) allows you to
assign public IP addresses to symbolic names. The DNS server is required to convert the DNS
name into the IP address when a connection is being established to a server.
You can specify the IP address for your router/gateway here. This forwards address requests
from the phone to its DNS server.
There is no default setting for a DNS server.
Alternate DNS Server
Enter the IP address for the alternate DNS server that should be used in situations where the
preferred DNS server cannot be reached.
