elmeg IP120 / en / elmegIP120_v1 / settings.fm / 01.08.2012
V
e
rsion 2, 27.0
5
.2010
57
elmeg IP120
Teldat
Configuring basic settings
Resetting the device to the default settings
If you give your device to a third party or change workstation, you can delete your individual
settings and data by resetting the device to the factory settings. All system settings are reset to
the default settings. User-specific data is deleted.
This means that network configurations, VoIP accounts, directories, call lists, data in the resource
directory and all of your individual settings are deleted or reset to the factory settings.
You need the administrator password before you can use this function (
‰
¢
Settings
¢
Reset
~
Enter the administrator password.
§§OK§§
Press the display key. The password is verified.
If the password is correct, you must now confirm the operation.
§§Yes§§
Press the display key. The device is reset to the factory settings.
Resetting via device button
You can also reset the device by using the reset button on the underside of the device.
The reset button is located behind the small open-
ing labelled
Reset
. Use a pointed item, e.g., a paper
clip.
¤
Reset: Press and hold the button for at least
5 seconds to return all settings to the factory set-
tings.
Reset Button
