elmeg IP120 / en / elmegIP120_v1 / starting.fm / 01.08.2012
V
e
rsion 2, 27.0
5
.2010
20
elmeg IP120
Teldat
First steps
Setting up the device (for the first time)
Your device will start
automatically
as soon as it is connected to the mains power supply.
Please be aware that the device is powered by PoE (Power over Ethernet). This means that it is
supplied with power as soon as it is connected to an Ethernet switch with PoE-functionality.
The first time you use the device, an installation wizard will start automatically and guide you
through the necessary installation steps.
Configuring language and time zone settings
When you have made your selection, press the end key
I
to return to the last entry screen.
You can correct your selection if necessary.
¤
Use the navigation key to select the
required language. To do this, press up or
down on the navigation key
q
.
Further information about the naviga-
tion key can be found on
.
¤
Press the display key under
§OK§
to con-
firm your selection.
You can also use the OK function on the
navigation key (by pressing
‰
in the
centre of the key).
¤
Use the navigation key to select the
required time zone.
¤
Press the display key under
§OK§
to con-
firm your selection.
Please note
The date and time are automatically set by a time server. You can select a time server using the
Web configurator or deactivate this function (
Select your Language
OK
Deutsch
English
Francais
Select Time Zone
OK
(GMT) GMT, Dublin, Lon-
(GMT+01:00) Amster-
(GMT+02:00) Athens,
