elmeg IP120 / en / elmegIP120_v1 / web_configurator.fm / 01.08.2012
V
e
rsion 2, 27.0
5
.2010
80
elmeg IP120
Teldat
Configuring phone settings via the Web configurator
General provider data
Domain
Specify the last part of your SIP address (URI).
Example: For the SIP address
you would enter
provider.com
.
Proxy Server Address
The SIP proxy is your VoIP provider's gateway server. Enter the IP address or the DNS name
of your SIP proxy server.
Example:
myprovider.com
.
Proxy Server Port
Enter the number of the communication port that the SIP proxy uses to send and receive sig-
nalling data (SIP port). Port 5060 is used by most VoIP providers.
Registration Server
Enter the IP address or the DNS name of your registrar server. The registrar is needed when
the phone is registered. It assigns your SIP address (username@domain) to the public IP
address/port number your phone uses to log in. With most VoIP providers, the registrar
server is identical to the SIP server.
Example:
reg.myprovider.de
.
Registration Server Port
Enter the communication port used on the registrar. Port 5060 is used in most cases.
Registration Refresh Time [sec]
Enter the time intervals at which the phone should repeat the registration with the VoIP
server (SIP proxy) (a request will be sent to establish a session). The repeat is required so that
the phone's entry in the tables of the SIP proxy is retained and the phone can therefore be
reached. The repeat will be carried out for all activated VoIP phone numbers. The default is
120 seconds.
If you enter 0 seconds, the registration will not be repeated periodically.
Network provider data
The phone needs to know its public address in order to receive caller voice data.
The SIP protocol recognises the following options:
u
The phone requests the public address from a STUN server on the Internet (Simple Transver-
sal of UDP over NAT). STUN can only be used with asymmetric NATs and non-blocking fire-
walls.
u
The phone does not direct the connection request to the SIP proxy but to an outbound proxy
on the Internet that supplies the data packets with the public address.
The STUN server and outbound proxy are used alternately to work around the NAT/firewall in
the router/gateway.
¤
Enter the required data for the STUN server
or
outbound proxy:
