elmeg IP120 / en / elmegIP120_v1 / starting.fm / 01.08.2012
V
e
rsion 2, 27.0
5
.2010
21
elmeg IP120
Teldat
First steps
Establishing a connection to the local network
Your phone must be connected to the local network before it can connect to the Internet and
before you can operate it from a PC.
The device checks to see if a network connection already exists. The network connection is
automatically established if the phone has automatically been assigned an IP address from a
DHCP server in the network. If this is the case, the following screen will not appear and you can
skip to
If your phone has no network connection, you will need to configure the network manually.
Depending on the type of network, you will need the following information about the configu-
ration:
u
If the network uses IP protocol version 4 (IPv4) with a static IP address, you will need:
The device IP address, the network subnet mask, the IP addresses of the standard gateway
and DNS server.
u
If the network uses IP protocol version 6 (IPv6):
IP addresses automatically: select
IPv6
as
Network Type
. The connection is then established
automatically.
IP addresses statically: the device IP address, the address prefix length and the DNS server IP
address.
If there is still no network connection, you will then be asked whether you wish to configure the
connection manually.
¤
Select
§§Yes§§
if you have the required information.
if you want to use the display menu to configure the network at a later date
Your device is now connected to the local network and can be configured for Internet teleph-
ony.
Please note
The following network configuration is the default setting on your device: LAN with IP protocol
version 4 (IPv4) and DHCP. This are the suitable settings for operating the device on an elmeg
hybird phone system/gateway.
If you selected
§§Yes§§§
, you can configure the
network immediately.
Depending on your selection, additional
screens may be displayed so you can enter
the required information.
More detailed information on LAN configu-
ration can be found on
.
¤
Once you have configured all settings,
press the display key under
§§OK§§
. Your set-
tings are saved.
Local Network
OK
Network Type
IP Address Type
IP Address
Back
