elmeg IP120 / en / elmegIP120_v1 / telephony.fm / 01.08.2012
V
e
rsion 2, 27.0
5
.2010
36
elmeg IP120
Teldat
Making calls
Muting
You can deactivate the microphone for the receiver, the speaker kit and the headset. The other
party can then no longer hear you.
C
Press the mute key during the phone call.
Press the key again to reactivate the microphone.
The
C
key is lit up while the function is activated and the
^
icon is displayed.
Activating/deactivating speaker mode
Activating via the receiver during a call:
A
&
Press the speaker key and put down the receiver.
The
A
key is lit up while the function is activated and the
@
icon is displayed.
In speaker mode, you hear the caller via the speaker.
Deactivating speaker mode during a call:
c
Lift the receiver. Continue the call via the receiver.
Do not disturb
You can activate the Do Not Disturb (DND) function if you do not want to receive any calls and
you do not want the phone to ring.
You can still make calls when this function is activated.
G
Press the Do Not Disturb key.
Press the same key again to deactivate the function.
The
G
key is lit up while the function is activated and the
Ñ
icon is displayed.
Please note
You should tell your caller if you have activated the speaker.
Please note
u
You can permanently deactivate the ringer for anonymous calls (
You can use the Web configurator to create a blacklist of unwanted names and numbers
(
). Once you activate the blacklist function, calls from these numbers will not
be put through.
