Telair TIG 3000D, Use And Maintenance Manual And Instructions For Installation

Page: 20 / 48

TIG 3000 D
Vers. 002
20
GB
indicates the generator model
and hardware and software versions
indicates the language setting;
by pressing BOOST followed by START/STOP or
AUTO it is possible to scroll through the available
languages
end of the available list, by
pressing BOOST the panel is returned to its
standard display mode.
8.3 Language Setting
To select the language in which the display will
show the main messages, press the BOOST but-
ton, then with the START/STOP and AUTO but-
tons scroll through the menus to reach the de-
sired option
Press BOOST to display the message
With the buttons START/STOP and AUTO, scroll
through the available language options, then
press BOOST once again. This will display the
message
then the display will revert to showing again the
generator stand-by state icons sequence.
8.4 Starting the generator in manual mode
Press the START / STOP button: the corre-
sponding LED lights up (fig.30 ref. 9) and the
generator controls the starting procedure; the
display shows the icon
Once the equipment has started, the display re-
peatedly shows the sequence of icons related to
the generator state of operation:
alternate
when the generator makes 230 V~ voltage avail-
able
output voltage
delivered power
total hours of operation.
4 attempts are performed at the end of which, if
the generator fails to start, an alarm signal is
produced with the corresponding red LED (Fig.30
ref. 8) lighting up and the display showing the
icon
.
8.5 Generating set stop
Press the START/STOP button. The generating
set stops on stand-by, the display shows the
icons
.
.
repeatedly in succession.
8.6 Starting the generating set in automatic
mode
Press the AUTO button: the corresponding LED
lights up on and the display shows the icons
.
.
repeatedly in succession.