Vers. 002
TIG 3000 D
19
GB
6 LED Booster, it illuminates when the BOOST
function is on (fig.30 ref. 3)
7 MAINTENANCE red LED: the display shows
the type of required maintenance (engine lu-
bricating oil level check or replacement).
8 ALARM red LED: indicates a fault. The display
provides detailed information on the fault de-
tected by the system.
9 GEN ON LED: it illuminates when the genera-
tor is in operation. The display shows the pa-
rameters relating to the state of operation of
the generator.
10 AUTO LED: it indicates that the corresponding
function is active
11 ON LED: indicates that there is power to the
panel.
12 microUSB port: used to perform diagnostic
tests or software updates for the generator via
a PC.
On the back of the panel are a connector for the
connecting cable to the generator (fig.31 ref. 1)
and the RJ11 connector for connection to an do-
motics control unit.
8 GENERATING SET USE
8.1 First starting
If the fuel supply circuit is empty, the
first start-up can be difficult because the elec-
tric pump will take several seconds to fill it.
You may want to perform a number of at-
tempts.
Before the first starting check the oil level in the
engine (see the chapter concerning mainte-
nance).
Turn the safety switch (fig.16 ref. 1) on the gen-
erator to I.
Set to ON the switch (fig.30 ref. 1) on the control
panel. The ON LED lights up (fig.30 ref. 11); for
one second, the display shows the Telair logo
and the resident software version, then it starts
repeating a sequence of 3 icons:
generator in standby mode
(OFF)
battery voltage
total hours of operation
The generator is on stand-by.
8.2 Information menu
Pressing the MENU key (fig.30 ref. 3) gives ac-
cess to the list of searchable information items;
then, the START/STOP keys (fig.30 ref. 5) and
AUTO key (fig.30 ref. 4) can be used to scroll
forward or backward in the menus:
indicates the number of hours
to the next oil change
indicates the total running
hours
by pressing boost and then
START/STOP or AUTO the last 10 recorded
alarm events can be viewed
Summary of Contents for TIG 3000D
