TIG 3000 D
Vers. 002
2
GB
This manual has been drawn up by the Manu-
facturer in order to provide basic information
and instructions for performing all generating
set operation and service tasks in an adequate
and safe manner.
It is an integral part of the generating set
equipment, must be kept with care throughout
the equipment life, and must be protected
against any agent that could damage it. It must
follow the generating set if installed on a new
vehicle, or if its ownership changes hands.
The information in this manual is intended for
the personnel in charge of installing the gener-
ating set, and for all those involved in its main-
tenance and use.
The manual defines the purpose for which the
equipment has been built and contains all the
information required for its safe, correct use.
Constant observance of the contained informa-
tion will ensure user safety, low running costs
and a longer equipment life.
To facilitate reference, this manual has been
divided into chapters specifying the main no-
tions contained; for quick consultation, refer to
the table of contents.
You are strongly advised to read the manual
and the reference documents throughout: this
is the best way to ensure long-lasting perform-
ance, reliability and prevention of injury or
damage.
The drawings in this manual are provided by
way of example only. You may find that the il-
lustrations differ from the actual parts on the
machine in your possession: this does not in
any way affect the validity of the general and
safety information in this manual.
"Graphic safety symbols” have been employed
in this booklet to identify different levels of dan-
ger or important information:
Information to avoid potentially danger-
ous situations that could result in serious injury
or possible harm to one’s health.
Information to avoid situations that
could potentially result in damage to property.
Important information for correctly carry-
ing out the operations described or for the cor-
rect usage of the equipment.
Before any work on the generating
set is carried out, those involved should
carefully consult this manual making sure
that they have understood its contents.
This generator must be installed
solely and exclusively by trained and
authorised personnel, in accordance with
the manufacturer’s instructions. It must be
used only and exclusively to produce
electrical power on motor vehicles or on
stationary equipment connected to an
electrical system built to current standards
and sized in accordance with the power
rating.
The generator does not have any
own internal automatic devices for protec-
tion against current leakage (automatic cut-
out switch). This safety system must be in-
tegrated in the distribution system to the
utilities.
Never operate the generator without
the door or with the door open. In addition
to implying risks for the operator, efficient
cooling would not be guaranteed and seri-
ous damages could be caused to the gen-
erator.
Remove any flammable substances
(for example: petrol, paints, solvents, etc.)
that might be stored near the generating
set.
Make sure that any hot parts of the generat-
ing set are not in contact with any flamma-
ble materials.
Never fill up the fuel tank while the engine is
running.
Never touch the generating set or the wiring
connections with wet hands.
Summary of Contents for TIG 3000D
