www.tekvox.com
ShareView Wireless
79060-WPS User Manual
How to install
1.
Drill two holes in the wall as indicated on the drawing.
Horizontal distance: 177 mm ± 0.15
2.
At the bottom of Base Unit, turn in 2 flat screws into 2 holes to be fasten enough.
Note:
Mounting screws and plugs are not included in the Wireless Media box. The type of screws
depends on the type of wall (stone, wood, plasterboard, etc.) you are mounting the base unit to.
Make sure the head of the screw is not larger than the hole in the bottom of base unit.
3.
Place the WMS on the wall and fixate the base unit with the 2 unfixed screws.
Antenna placement rules
The antennas should be oriented vertically, perpendicular to the ceiling and parallel to the
walls.
The antennas should be installed far enough (at least 50cm/1.6ft) from metallic surfaces to
avoid unwanted reflections and far enough (at least 1m/3.3ft) from other radio equipment that
operates in the same frequency range, e.g. other Wi-Fi access points, cordless telephone, etc.
It is also best to install antennas at least 15 cm (6 inches) from concrete walls.
The best setup is a direct line of sight between antennas and Buttons. Any obstruction will
cause the signal to follow a longer propagation path, which can result in performance
degradation.
Due to the particular radio pattern of the dipole antennas, the antennas should not be placed
just above potential positions of Wireless Media users. As a result, the advised position for the
antennas is at the side of the meeting room.
