75
Select the number of samples that you want to copy. Select all samples, a range of samples, or
only the samples between the cursors. If you select Data between cursors, you can use the
multipurpose knobs to adjust the positions if the cursors are already active. If they are not, the
cursors will be turned on at the positions they were in the last time they were used.
Select the Include waveform scale factors check box if you want to include waveform details such
as header information (record length, sample interval, trigger point information, and so on). If you
only want to include the waveform voltage values, clear the selection.
If you are copying Fast Acquisition data, select the data ordering from the list.
Behavior
The Waveform curve data range can be anywhere from one sample to the record length of the
selected waveform.
The copy operation takes place after you click Copy.
If you select Data between cursors, another set of cursors may temporarily appear on your screen
while the copy is in progress.
Copy Setup: Measurements
Access this control window from the Edit menu.
Overview
Use this control window to copy measurements to the clipboard for use with other applications.
To Use
Select the data format for the measurement that you want to copy. For Histogram Data, the data
format is always CSV.
Select the type of measurement.
Behavior
When you select Displayed Measurements, all displayed measurements will be copied to the
clipboard.
When you select Measurement Snapshot, the current snapshot data is copied to the clipboard. If
there is no valid snapshot data, the default snapshot values will be sent to the clipboard.
When you select Histogram Data, the histogram data for the waveform will be copied in the CSV
format.
The copy operation takes place after you click Copy. Clicking the OK button accepts the changes
and closes the dialog box but does not copy the measurements.
Summary of Contents for TDS5000B Series
Page 36: ...36 AFTDS Differential Signal Adapter...
Page 280: ...280 Blackman Harris window...
