186
To Use
Click the Mask Segment and Vertex up and down arrows to select the segment or the vertex of the
mask to be edited. Click Add to add a point to the boundary in the selected segment and just after
the selected vertex. Click Del to delete the selected vertex from the selected segment. Click Del
All to remove all points in the selected segment.
To change the horizontal or vertical values for the selected segment and vertex, click the Mask
Values Horizontal or Vertical text box to activate the pop-up keypad. To save a mask, click Save
to activate the Save As dialog box. To recall a previously saved mask, click Recall to activate the
Recall dialog box.
Behavior
The Segment up and down arrows increase or decrease the segment number by one. The Vertex up
and down arrows increase or decrease the vertex by 1. To set a specific number, click the Vertex
text box to activate the pop-up calculator.
Clicking the Add button adds a point to the boundary in the selected segment and just after the
selected vertex in addition to moving any points that follow the newly added point in the boundary
up one. For example, if there are 6 points in the boundary of the selected segment and you add a
point when the selected vertex is 4, then the vertex which was 4 becomes vertex number 5,
number 5 becomes 6, and vertex 6 is changed to vertex 7.
Clicking Del deletes the selected vertex from the selected segment and moves any points that
follow the deleted point down one in the boundary. Clicking Del All deletes all points in the
selected segment, effectively deleting that segment.
Clicking the Setup button will return you to the Masks Setup control window. Clicking the
Controls button will activate the User Mask Edit control window where you can make quick
changes to a User mask.
Summary of Contents for TDS5000B Series
Page 36: ...36 AFTDS Differential Signal Adapter...
Page 280: ...280 Blackman Harris window...
