Recalling data
Recalling data
The oscilloscope provides permanent internal memory locations from which you can recall instrument setups and waveforms.
You can also recall (load) setups and waveforms from
fi
les on an external USB drive.
Recalling oscilloscope setup information
Use this procedure to recall (load) oscilloscope settings from a memory location or external
fi
le and set the oscilloscope to
those settings.
You can recall (load) saved setup data to quickly con
fi
gure the oscilloscope to take a certain measurement. A setup
fi
le
contains most of the oscilloscope settings, including vertical, horizontal, trigger, cursor, and measurement parameters. It
does not include communications information, such as GPIB or LAN con
fi
guration.
1.
(Optional) Install a USB drive to recall the setup data from a
fi
le on the USB drive.
2.
Push the
Save/Recall
front-panel button.
3.
Push the
Action
side-menu button.
4.
Use the
Multipurpose
knob to select and click
Recall Setup
.
5.
To recall setup data from internal setup memory:
a.
Push the
Recall From
side-menu button.
b.
Select and click
Setup
.
c.
Push the
Setup
side-menu button and use the
Multipurpose
knob to select the setup memory location (1-10).
d.
Push the
Recall
side-menu button. The oscilloscope changes its settings to those that are in the speci
fi
ed setup
memory.
6.
To recall (load) setup data from a
fi
le on the USB drive:
a.
Push the
Recall From
side-menu button.
b.
Select and click
USB File (*.SET)
.
c.
Push the
Select File
side-menu button.
d.
Highlight the setup
fi
le (*.SET) to load.
e.
Push the
Multipurpose
knob or the
Recall
side-menu button. The oscilloscope loads and implements the settings.
TBS2000 Series User Manual
71
