Advanced Features and Troubleshooting Manual
151
Troubleshooting Phaser 750 Printers
Enabling and disabling the Intelligent Ready feature
■
When the printer is idle for the time set in the Energy Star front panel menu, the
printer cools down completely. When the printer exits the Energy Star mode, it is
ready to print in about 90 seconds.
■
The Energy Star default is set to 30 minutes. After 30 minutes of inactivity, the printer
begins a cool-down cycle that requires a 90-second warm-up period before being
ready to use again.
■
Increasing the Energy Star value from 30 minutes keeps the printer ready for printing
and eliminates the warm-up period. For typical office environments, set the value to
4 hours.
■
For optimum printing performance and best toner economy, leave the printer turned
on overnight and during weekends.
To increase the timeout value:
1.
Press
Menu
on the front panel; the following message appears:
2.
Scroll to the
Configuration
and press
Menu;
the printer displays the following
message:
3.
Scroll to
Energy Star Timeout
and press
Menu;
the printer displays the following
message:
4.
Scroll until the desired setting is reached. For best performance, select 4 hours.
Change the Energy Star Timeout from its default value (30 minutes) to a maximum
value: Press
<----
.
5.
Press
OK.
6.
Scroll to
Intelligent Ready
and press
Menu;
the printer displays the following
message:
7.
Scroll to
On
and press
OK;
the printer displays the following:
8.
Press
until
Ready
appears.
Note
Enabling Intelligent Ready sets the Energy Star Timeout to 4 hours.
Menu Maps
<---- ----> Menu
Configuration
<---- ----> Menu
Timeout:30 minutes
<---- ----> OK
Intelligent Ready
<---- ----> Menu
Intelligent Ready
<---- ----> : On
OK
