background image

User Manual

6-1

Chapter

6

Troubleshooting

If you need help  

If you need assistance, contact your local Tektronix dealer or sales 
representative, Tektronix Customer Support Hotline, the Tektronix Bulletin 
Board Service (BBS), or Tektronix’ interactive fax system (HAL).

Customer Support Hotline

If your problem is still not resolved after first trying the suggestions in this 
Troubleshooting chapter, call the Tektronix Customer Support Hotline in the 
United States and Canada at 1-800-835-6100 (from 6:00 am to 5:00 pm PST).  

For technical support outside the United States and Canada, contact your 
local Tektronix dealer or local Tektronix office.  

Printer service

If your printer needs service, call 1-800-835-6100 in the United States, from 
6:00 am to 5:00 pm PST.  Outside the U.S., contact your Tektronix dealer or 
local Tektronix office.

The Tektronix Bulletin Board Service

The Tektronix Bulletin Board Service (BBS) is available for direct 
downloading of the latest versions of printer drivers, utilities, and files.  If 
you have a Macintosh or PC, communication software, and modem, you can 
call the system and use the menus to locate and download the files you 
want.

To access the BBS 24 hours a day, 7 days a week, call (503) 685-4504.

Summary of Contents for Phaser 540 Plus





































































































































































































Reviews: