Getting Set Up
2
User Manual
2-29
7.
Assign the printer to a port:
a.
Select the printer from the list of Installed Printers.
b.
Select the Set As Default Printer button if you want this
printer to be the default.
c.
Select the Connect button to display the Connect dialog box.
d.
In the Connect dialog box, set the Transmission Retry value to
850. Refer to your Windows documentation for details.
e.
In the Connect dialog box, select a port:
Interface
Select
Parallel
LPT1
or
LPT2
Serial
COM1
or
COM2
(Requires a Phaser Share card)
Network
LPTx
or
COMx
(Requires a Phaser Share card)
Note
For information on ordering options, refer to “Upgrade kits” on
page B-1.
■
If you selected a parallel port:
Go on to Step
f
.
■
If you selected a network port:
Click on the Network button to open the Printers –
Network Connections dialog box. Fill in each item
according to the printer’s configuration page. Refer to
Windows documentation and the Phaser Share User Manual
for details, or ask your network administrator for help.
■
If you selected a serial port:
Click on the Settings button to open the Settings dialog
box. Fill in each item according to the printer’s
configuration page, then click
OK
. Refer to your Windows
documentation or ask your network administrator for help.
