Getting Set Up
2
User Manual
2-17
Adding paper or transparencies
Unpack the media tray(s). Be sure to remove all adhesive tape and
protective foam. The printer uses four different trays:
Note
Make sure that you load the correct media. Each tray is designed
and labeled for
only paper or transparency. If you load the wrong
media type in a tray, you will get an error message.
If you have the Lower Tray Assembly installed, make sure that all
trays in the printer at any one time are the same media size
(required for the automatic tray-switching feature).
1.
To load paper or transparencies, push down on the media tray’s
metal plate until it clicks, locking it in place.
Tray
Size
A/Letter Paper
standard
8.5 x 11 in.
A/Letter Transparency
optional
8.5 x 11 in.
A4 Paper
optional
210 x 297 mm
A4 Transparency
optional
210 x 297 mm
9008-13
A4
PA
PER
