Operating Basics
Front Panel: DS1 Connectors and Status LEDs
1. DS1 A, DS1 B RCV
: Bantam-type jacks for test signals entering
the instrument (input).
2. DS1 A, DS1 B XMT
: Bantam-type jacks for test signals leaving
the instrument (output).
3.
The
DS1
signal status LEDs (valid for DS1-A signals only):
The
Pulses
LED (green) lights when the instrument detects
valid signal pulses on the DS1 A RCV connector. This LED
does not light for DS1 B pulses.
The
Errors
LED (red) lights when the instrument detects an
alarm or event on the DS1 A RCV connector. Remains lit until
the alarm or event stops occurring. This LED does not light
for DS1 B errors.
The
History
LED (yellow) lights when the instrument has
detected a signal alarm or event on the DS1 A RCV connector.
The History LED remains lit until the instrument is cleared
with the application RESTART button. This LED does not
light for DS1 B error history.
NetTek YBT100 and YBT100DS3 Backhaul Tester
15
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
