General Safety Summary
General Safety Summary
Review the following safety precautions to avoid injury and prevent
damage to this product or any products connected to it.
To avoid potential hazards, use this product only as speci
fi
ed.
Only quali
fi
ed personnel should perform service procedures.
While using this product, you may need to access other parts of a larger
system. Read the safety sections of the other component manuals for
warnings and cautions related to operating the system.
To Avoid Fire or Personal Injury
Connect and Disconnect Properly.
Do not connect or disconnect probes or
test leads while they are connected to a voltage source.
Observe All Terminal Ratings.
To avoid
fi
re or shock hazard, observe all
ratings and markings on the product. Consult the product manual for
further ratings information before making connections to the product.
The inputs are not rated for connection to mains or Category II, III, or
IV circuits.
Do not apply a potential to any terminal, including the common
terminal, that exceeds the maximum rating of that terminal.
Do Not Operate Without Covers.
Do not operate this product with covers
or panels removed.
Do Not Operate With Suspected Failures.
If you suspect that there is
damage to this product, have it inspected by quali
fi
ed service personnel.
Avoid Exposed Circuitry.
Do not touch exposed connections and
components when power is present.
Recharge Batteries Properly.
Recharge batteries for the recommended
charge cycle only.
Use Proper AC Adapter.
Use only the AC adapter speci
fi
ed for this
product.
iv
NetTek YBT100 and YBT100DS3 Backhaul Tester
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
