In this section:
Introduction .............................................................................. 4-1
Equipment required .................................................................. 4-2
Update the RPM configuration in KCon ................................... 4-2
Device connections .................................................................. 4-3
Set up the measurements in Clarius ........................................ 4-5
Introduction
The 4225-RPM Remote Amplifier/Switch Module is an accessory for the 4225-PMU 2-Channel
UltraFast I-V Module. The 4225-RPM has two purposes:
To extend the current measurement ranges of the PMU to the 100 nA range.
To enable the user to switch between the instruments without changing cables.
This section provides an example of how to use the 4225-RPM to switch the 4200-SMU or 4210-SMU,
4210-CVU, and 4225-PMU and make DC I-V, C-V, and pulsed I-V measurements to a single device
without having to reconnect the device between measurements.
For this example, you will:
Make connections from two SMUs, one CVU, and the two-channel PMU to the inputs of two
4225-RPMs.
Make connections from the outputs of the two 4225-RPMs to a diode.
Generate DC I-V, C-V, and pulsed I-V measurements.
Section 4
Use the RPM to switch the SMU, CVU, and PMU
