Model 4200A-SCS Parameter Analyzer User's Manual
Section 5: Configure and use a Series 700 Switching System
4200A-900-01 Rev. C / January 2019
5-13
Configure the connectpins action
To configure the connectpins action:
1. Select the first
connectpins
action you added to the project tree.
2. Select
Configure
.
Figure 65: Configure highlighted
3. Make the following connections using the pairs of TermIdStr# and Pin# fields in the action:
SMU1
– Pin 3
SMU2
– Pin 2
SMU3
– Pin 1
GNDU
– Pin 4
When you are finished, the Key Parameters view of the action should look like the next graphic. The
order of the instruments does not matter if each instrument is paired with the correct pin number.
