Command Groups
Table 2-33: Vertical Commands (cont.)
Command
Description
Returns the recommended deskew for the
probe connected to the speci
fi
ed channel
Returns the resistance of the probe that is
attached to the speci
fi
ed channel
Sets or returns the input bypass setting of
channel <x>TekVPI probe
Returns the units of measure of the probe
that is attached to the speci
fi
ed channel
Sets or returns the vertical scale of the
speci
fi
ed channel
Sets or returns channel input termination
Sets or returns the units for the speci
fi
ed
channel
Returns parameters for digital channel <x>
Sets or returns the waveform label for digital
channel<x>
Sets or returns the logical threshold for digital
channel <x>
Sets or returns the vertical position for digital
channel <x>
Causes the deskew values for all channels
to be set to the recommended values
Sets or returns the state of the deskew table
display
Returns reference waveform data for channel
<x>
Returns the date that a reference waveform
was stored
Sets or returns the horizontal position of the
speci
fi
ed reference waveform in percent of
the waveform that is displayed to the right of
the center vertical graticule
Sets or returns the horizontal scale for a
reference waveform
Sets or returns the speci
fi
ed reference
waveform label
Sets or returns the vertical position for
reference channel <x>
Returns the time that a reference waveform
was stored
Sets or returns the vertical position of the
speci
fi
ed reference waveform
2-62
MSO4000 and DPO4000 Series Programmer Manual
Summary of Contents for DPO4000 Series
