Tektronix DPO4000 Series Programmer'S Manual Download Page 139

Page: 139 / 623

Commands Listed in Alphabetical Order

Syntax

CH<x>:DESKew <NR3>
CH<x>:DESKew?

Arguments

<NR3>

is the deskew time for channel <x>, ranging from -100 ns to +100 ns

with a resolution of 1 ps.

Examples

CH4:DESKew 5.0E-9

sets the deskew time for channel 4 to 5 ns.

CH2:DESKew?

might return

:CH2:DESKEW 2.0000E-09

indicating that the

deskew time for channel 2 is set to 2 ns.

CH<x>:INVert

Sets or returns the invert function for channel <x>, where is the channel number.
When on, the invert function inverts the waveform for the speci

ed channel.

NOTE.

This command inverts the waveform for display purposes only. The

oscilloscope does not use an inverted waveform for triggers or trigger logic inputs.

Group

Vertical

Syntax

CH<x>:INVert {ON|OFF}
CH<x>:INVert?

Arguments

OFF

sets the invert function for channel <x> to off.

sets the invert function for channel <x> to on.

Examples

CH4:INVert ON

inverts the waveform on channel 4.

CH2:INVert?

might return

:CH2:INVERT 0

indicating that channel 2 is not

inverted.

CH<x>:LABel

Sets or returns the waveform label for channel <x>, where x is the channel number.

Group

Vertical

MSO4000 and DPO4000 Series Programmer Manual

2-125

Summary of Contents for DPO4000 Series
















































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for DPO4000 Series

Reviews:

Brands by name

Popular brands

Tektronix DPO4000 Series, Programmer'S Manual

Search results

Summary of Contents for DPO4000 Series

Reviews:

Brands by name

Popular brands