Commands Listed in Alphabetical Order
Examples
MEASUREMENT:INDICATORS:STATE MEAS2
turns on the display of visible
measurement indicators for measurement 2.
MEASUREMENT:INDICATORS:STATE?
might return
MEASUREMENT:INDICATORS:STATE OFF
indicating that no measurement
indicators are active.
MEASUrement:INDICators:VERT<x>? (Query Only)
Returns the value of the speci
fi
ed vertical measurement indicator <x> from the
trigger point, where <x> can be 1 through 8. A negative value means that the
indicator is positioned earlier in the waveform record than the trigger point.
Group
Measurement
Syntax
MEASUrement:INDICators:VERT<x>?
Examples
MEASUREMENT:INDICATORS:VERT2?
might return
MEASUREMENT:INDICATORS:VERT2 -3.724507E-6
indicating that the
second measurement indicator is positioned 3.72
μ
s before the trigger point.
MEASUrement:MEAS<x>? (Query Only)
Returns all measurement parameters for the speci
fi
ed active measurement <x>.
Group
Measurement
Syntax
MEASUrement:MEAS<x>?
MEASUrement:MEAS<x>:COUNt? (Query Only)
Returns the number of values accumulated for this measurement since the last
statistical reset. Values may be ignored if they generated an error. Measurements
are speci
fi
ed by x, which ranges from 1 through 8.
Group
Measurement
Syntax
MEASUrement:MEAS<x>:COUNt?
2-228
MSO4000 and DPO4000 Series Programmer Manual
Summary of Contents for DPO4000 Series
