Tektronix DPO4000 Series Programmer'S Manual Download Page 196

Page: 196 / 623

Commands Listed in Alphabetical Order

Examples

FILESYSTEM:READFILE “D:/test_data/tek00016CH1.csv”

reads the

content of the speci

le, if the

le exists and is readable, and sends the content

of the

le to the current interface.

FILESystem:REName (No Query Form)

Assigns a new name to an existing

le.

Group

File System

Syntax

FILESystem:REName <old file path>,<new file path>

Related Commands

FILESystem:CWD

Arguments

is a quoted string that de

nes the

le name and path. If the

path is within the current working directory, you need only specify the

le name.

is a quoted string that de

nes the

le name and path. If the

path is within the current working directory, you need only specify the

le name.

Examples

FILESYSTEM:RENAME "D:/TEK00000.SET","D:/MYSETTING.SET"

gives the

le named TEK00000.SET the new name of MYSETTING.SET. The

le remains

in the root directory on the D drive.

FILESystem:RMDir (No Query Form)

Deletes a named directory. This command deletes the speci

ed directory and all

of its contents. The directory must not be a read-only directory.

Group

File System

Syntax

FILESystem:RMDir <directory path>

Related Commands

FILESystem:CWD

Arguments

is a quoted string that de

nes the directory name and path.

If the

le path is within the current working directory, you need only specify

the

le name.

2-182

MSO4000 and DPO4000 Series Programmer Manual

Summary of Contents for DPO4000 Series
















































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for DPO4000 Series

Reviews:

Brands by name

Popular brands

Tektronix DPO4000 Series, Programmer'S Manual

Search results

Summary of Contents for DPO4000 Series

Reviews:

Brands by name

Popular brands