Commands Listed in Alphabetical Order
DESkew (No Query Form)
Causes the deskew values for all channels to be set to the recommended values.
Equivalent to pressing the "Set all deskews to recommended values" button in
the application UI.
NOTE.
The actual deskew values for each channel can be set or queried using the
command.
Group
Vertical
Syntax
DESkew {SETALLtorec}
Arguments
<SETALLtorec>
sets the deskew for all channels to the recommended values.
DESkew:DISPlay
Sets or returns the state of the deskew table display.
Group
Vertical
Syntax
DESkew:DISPlay {OFF|ON|0|1}
DESkew:DISPlay?
Arguments
OFF
or 0 turns off the deskew table display.
ON
or 1 turns on the deskew table display.
DIAg:LOOP:OPTion
Sets the self-test loop option.
Group
Calibration and Diagnostic
Syntax
DIAg:LOOP:OPTion {ALWAYS|FAIL|ONFAIL|ONCE|NTIMES}
Arguments
ALWAYS
continues looping until the self tests (diagnostics) are stopped via the
front panel or by an oscilloscope command.
2-158
MSO4000 and DPO4000 Series Programmer Manual
Summary of Contents for DPO4000 Series
