Commands Listed in Alphabetical Order
Syntax
CH<x>:PRObe:UNIts?
Examples
CH4:PROBE:UNITS?
might return
:CH4:PROBE:UNITS "V"
indicating that the
units of measure for the probe attached to channel 4 are volts.
CH<x>:SCAle
Sets or returns the vertical scale for the channel speci
fi
ed by <x>, where x is the
channel number.
Each waveform has a vertical scale parameter. For a signal with constant
amplitude, increasing the Scale causes the waveform to be displayed smaller.
Decreasing the scale causes the waveform to be displayed larger.
Scale affects all waveforms, but affects channel waveforms differently from
other waveforms:
For channel waveforms, this setting controls the vertical size of the acquisition
window as well as the display scale. The range and resolution of scale
values depends on the probe attached and any other external factors you have
speci
fi
ed.
For reference and math waveforms, this setting controls the display only,
graphically scaling these waveforms and having no affect on the acquisition
hardware.
Group
Vertical
Syntax
CH<x>:SCAle <NR3>
CH<x>:SCAle?
Related Commands
,
,
Arguments
<NR3>
is the vertical channel scale in units-per-division. The value entered here
is truncated to three signi
fi
cant digits.
Examples
CH4:SCALE 100E-03
sets the channel 4 scale to 100 mV per division.
CH2:SCALE?
might return
:CH2:SCALE 1.0000
indicating that the current scale
setting of channel 2 is 1 V per division.
2-134
MSO4000 and DPO4000 Series Programmer Manual
Summary of Contents for DPO4000 Series
