Teknor Industrial Computers PCI-993, Technical Reference Manual

Page: 201 / 204

Post Codes & Error Codes E-6
62 DMA#1 base register test passed. To do DMA#2 base register test.
65 DMA#2 base register test passed. To program DMA unit 1 and 2.
66 DMA unit 1 and 2 programming over.
To initialize 8259 interrupt controller.
7F Extended NMI sources enabling is in progress.
80 Keyboard test started. clearing output buffer, checking for stuck key,
to issue Keyboard reset command.
81 Keyboard reset error/stuck key found. To issue Keyboard controller
interface test command.
82 Keyboard controller interface test over. To write command byte and init
circular buffer.
83 Command byte written, Global data init done. To check for lock-key.
84 Lock-key checking over. To check for memory size mismatch with
CMOS.
85 Memory size check done. To display soft error and check for password or
bypass setup.
86 Password checked. About to do programming before setup.
87 Programming before setup complete. To uncompress SETUP code and
execute CMOS setup.
88 Returned from CMOS setup program and screen is cleared.
About to do programming after setup.
89 Programming after setup complete.
Going to display power on screen message.
8B First screen message displayed. <WAIT...> message displayed.
PS/2 Mouse check and extended BIOS data area allocation to be done.
8C Setup options programming after CMOS setup about to start.
8D Going for hard disk controller reset.
8F Hard disk controller reset done. Floppy setup to be done next.
91 Floppy setup complete. Hard disk setup to be done next.
95 Init of different BUSes optional ROMs from C800 to start.
(Please see Section E.02 for details of different BUSes).
96 Going to do any init before C800 optional ROM control.
97 Any init before C800 optional ROM control is over.
Optional ROM check and control will be done next.
98 Optional ROM control is done. About to give control to do
any required processing after optional ROM returns control and enable
external
Cache.