manualshive.com logo in svg

Teknor Industrial Computers PCI-993, Technical Reference Manual, Page: 121 / 204

Share
Download
Teknor Industrial Computers PCI-993 Technical Reference Manual Download Page 121

Video       13-6

13.04.2

FLAT PANEL INSTALLATION

The myriad of Flat Panel displays available makes it virtually impossible for us to show
every type of configuration that exists. For your convenience, we have published the
TEK933 FLAT PANEL CONFIGURATION GUIDE. This handy manual charts out the
cabling, jumper settings, and other special requirements for some of the most popular
displays.

The name of the Flat Panel BIOS file (.BFP extension) that you must use to update the
Flash EPROM BIOS is also included in this guide; see Section 17 to learn how to
perform a VGA BIOS file update with the UBIOS software.

Most Flat Panel displays require a special adapter board or cabling between them and
the TEK933. Please contact our Sales or Technical Support department for more
information on Flat Panel applications.

Summary of Contents for PCI-993













































































































































































































Reviews:

No comments