Teknor Industrial Computers PCI-993, Technical Reference Manual, Page: 202 / 204

Post Codes & Error Codes E-7
POST DESCRIPTION
CODE
99 Any initialization required after optional ROM test over.
Going to setup timer data area and printer base address.
9A Return after setting timer and printer base address.
Going to set the RS-232 base address.
9B Returned after RS-232 base address.
Going to do any initialization before Coprocessor test.
9C Required initialization before Coprocessor is over.
Going to initialize the Coprocessor next.
9D Coprocesor initialized.
Going to do any initialization after Coprocessor test.
9E Initialization after Coprocessor test is complete. Going to check extended
Keyboard,
Keyboard ID and num-lock. Keyboard ID command to be issued next.
A2 Going to display any soft errors.
A3 Soft error display complete. Going to set Keyboard typematic rate.
A4 Keyboard typematic rate set. To program memory wait states.
A5 Going to enable parity/NMI.
A7 NMI and parity enabled. Going to do any initialization
required before giving control to optional ROM at E000.
A8 Initialization before E000 ROM control over.
E000 ROM to get control next.
A9 Returned from E000 ROM control. Going to do any
initialization required after E000 optional ROM control.
AA Initialization after E000 optional ROM control is over.
Going to display the system configuration.
AB To uncompress DMI data and execute DMI POST init.
B0 System configuration is displayed.
B1 Going to copy any code to specific area.
00 Copying of code to specific area done.
Going to give control to INT-19 boot loader.