Teknor Industrial Computers PCI-993, Technical Reference Manual

Page: 131 / 204

AMIBIOS Setup 15-4
The windows in the program have layers, like boxes inside boxes. Selecting an icon,
may display another window with icons; in turn, clicking one of these icons can display
a window which contains a list of options. To return to a previous window, you press
the ESC key on the keyboard. If you press the ESC key from the main menu screen, an
EXIT SETUP window appears, which is explained in the next section.
The ESC key is used to close the current window and move to the previous
window. If you are in the main menu screen, pressing the ESC key displays the
EXIT SETUP window to allow you to save and exit the AMIBIOS Setup
program.
15.03.2 SAVING CONFIGURATIONS & EXITING AMIBIOS SETUP
The EXIT SETUP window displays the following options:
• Save changes and Exit
• Do not save changes and Exit
• Continue
Each is explained below:
Save changes and Exit
After having modified the AMIBIOS Setup, you can save the configuration in CMOS
RAM, by selecting this option. After the information is saved, the computer is
automatically rebooted. This option will not change the values saved in Flash EPROM.
To update the values in Flash, enter the VIP-UP program and perform a save (F10).
It is highly recommended that the system be turned off after a configuration
has been saved. Some hardware may only be configured during a power-up.
Do not save changes and Exit
This option is used to exit AMIBIOS Setup without saving the configuration to CMOS
RAM. After the information is saved, the computer is automatically rebooted.