Section:
Description:
Page No:
Date:
MEASUREMENTS
INSERTING 2 FIRST SCREWS
POSITONING DRAWER UNDER WORKSURFACE
COM_303
2 of 3
Sept 2017
fx UTILITY DRAWER INSTALLATION
WORK FLOW ACCESSORIES
STEP 2: Use dimensions X and Y to find exact location for the first two screws. Insert screws
partially, leaving space between Screw Head Washer and surface of the Worksurface.
STEP 1: There are two critical dimensions required to install the Drawer: X- dimension
between middle of cut outs on Drawer Rails and Y - dimension between center point of the
smaller arc of the cut out and front face of Drawer.
STEP 3: Bring the Drawer up to the underside of Worksurface making sure heads of Screws
engage inside Rails cut outs. Slide towards user side to secure in place.
Y=5 7/8"
X =19 15/16"
A
X
Y
B
Underside of
Worksurface
Side View of
Worksurface
Y
Leave
space
User Side
A
B
B
Worksurface and Drawer
Side View
