STEP 1: Loosen thumb clamps on Lower Clamp Assembly
STEP 2: Place the Bracket Assembly on the Desk
STEP 4: Place Clamp Plate on top of the Thumb Screw as shown above.
STEP 3: Loosen the Bottom Bracket Thumb Screw to the lowest position.
NOTE: For Dual, do this step for both Part.
Section:
Description:
Page No:
Date:
ASSEMBLE BRACKET ASSEMBLY
PLACE THE BRACKET ON DESK
LOOSEN THUMB SCREW
PLACE CLAMP PLATE
COM_218a
2 of 7
Jan 2020
DESK EDGE MOUNT ASSEMBLY
SWERV MONITOR MOUNT ASSEMBLY
A1
A5
A5
OR
OR
NOTE: Single Arm
NOTE: Dual Arm
A2
A3
B
A2
A3
A4
NOTE: For Dual,
do this step for both
Bottom Clamp.
NOTE: For Dual,
do this step for
both Screws.
NOTE: Single Arm
NOTE: Dual Arm
