STEP 3: Install Clamp assembly as shown above. Ensure the Grommet sits in the groove of the
Base Casting as shown in bottom ISO view on the top right corner.
Section:
Description:
Page No:
Date:
DRILL ROUND GROMMET HOLE
INSTALL GROMMET
ASSEMBLE CLAMP
COM_218c
2 of 6
Jan 2020
ROUND GROMMET MOUNT ASSEMBLY
SWERV MONITOR MOUNT ASSEMBLY
min 4"
L
C
STEP 1: Pre-drilled 2.75" (70mm) diam. hole. Location on the Worksurface as per specification
drawings.
NOTE: Keep min. distance of 4" from back edge of the Worksurface to the center of the
cut-out.
2.75" Dia Hole
STEP 2: Install Grommet
A4
A3
A2
Bottom ISO View
Groove
A4
A2
