Section:
Description:
Page No:
Date:
INSERT VESA PLATE & ARM ADJUSTMENT
CABLE MANAGEMENT
COM_208d
6 of 8
Sept 2017
MAST DYNAMIC ARM - MARKETPLACE EDGE CLAMP / MONITOR REMOVAL
ERGONOMICS AND ACCESSORIES
STEP 8: Insert Cable in Arm Wire Clip located under Dynamic Arm. Squeeze Cable
management Clip on both sides to release it, drop cable on it then put it back. Lead cables into
Stanchion Clip, then insert it to the back of Stanchion.
STEP 7: Hold arm in desired position, adjust the Spring Loaded Counterbalancing Load on top
of Stanchion Hub until Arm stabilize at the position.
F
Arm Wire Clip
Cable Management Clip
Underside View
NOTE: Rotate to "+" direction
for heavier monitor, "-" for
lighter Monitor.
Stop until Arm stabelized at one
position.
Dynamic Arm supports from
8-30 lbs.
Dynamic Arm Light supports
from 2-13 lbs.
Detail View
