Section:
Description:
Page No:
Date:
ARM COUNTERBALANCE LOAD ADJUSTMENT
CABLE MANAGEMENT
COM_210b
6 of 9
Sept 2017
MAST DYNAMIC ARM - STANDARD EDGE CLAMP
ERGONOMICS AND ACCESSORIES
STEP 7: Hold arm in desired position, adjust the Spring Loaded Counterbalancing Load on top
of Stanchion Hub until Arm stabilize at the position.
NOTE: Rotate Allen Key to "+"
direction for heavier monitor, "-"
direction for lighter monitor.
Stop until Arm stabilized at one
position.
Dynamic Arm supports from 8 to
30lbs.
Dynamic Arm Light supports from
2 to 13lbs.
STEP 8: Insert Cable in Arm Wire Clip located under Dynamic Arm. Squeeze Cable
management Clip on both sides to release it, drop cable on it then put it back. Remove
Stanchion Clip and Lead cables into through, then insert it to the back of Stanchion.
NOTE: Lead cables
into the Clip before
clipping to Stanchion.
Arm Wire Clip
Cable Management
Clip
Underside View
K
