1592006207 XB570L GB r1.1 26.08.2015
XB570L
9 /20
A series of light points on the front panels is used to monitor the loads controlled by the instrument. Each
LED function is described in the following table.
LED
MODE
ACTION
ON
Compressor enabled
Flashing
Programming Phase (flashing with LED
)
Anti-short cycle delay enabled
ON
Fan enabled
Flashing
Programming Phase (flashing with LED
)
Activation delay active
ON
Defrost active
Flashing
Drip time active
1, 2, 3, 4, H
ON
Freezing cycle 1, 2, 3, 4 or hold mode active
1, 2, 3, 4, H
Flashing
Instrument temporarily stop
ON
Alarm signalling
AUX, AUX2
ON
Aux or Aux2 enabled
9. HOW TO SELECT A CYCLE
1.
Push the
to move among the cycles C1, C2, C3, C4 and the holding cycle. The related symbol on
the display will be lighted and the cycle will be selected.
NOTE:
to pass from a cycle to another one simply push the
key when the controller is in stand –by
mode.
HOLD PHASE:
To select
H
symbol pushing the
.
Cycles are pre-set with the following values:
1.
Cy1:
for fast chilling and conservation of foods (hard +soft chill).
2.
Cy2:
for chilling and fast freezing of foods (hard +soft + freezing cycle).
3.
Cy3:
for direct fast freezing (only fast freezing cycle)
4.
Cy4:
for fast freezing avoiding ice skin (hard chill + freezing cycle)
5.
HLd:
hold mode function
6.
dEF:
for starting a manual defrost
2.
Now the cycle is memorised and can be activated.
1.
Verify that none cycle is running. If one cycle is running stop it by pushing the
key for 3 sec.
2.
Push the
to move among the cycles C1, C2, C3, C4 and the holding cycle. The related symbol
on the display will be lighted and the cycle will be selected
3.
Hold push the
key for several seconds till the display will show the first parameter of the
selected cycle (cyS) with its value.
4.
Use the UP and DOWN keys to browse the parameters.
5.
To modify a parameter push the SET key and use the arrow keys.
6.
Confirm the new value by pushing the SET key.
7.
The new value is recorded even if the programming is exited by time out.
TO exit:
wait for 30 sec or push both
SET+UP
kyes.
8.8 MEANING OF THE LEDS
9.1 HOW TO MODIFY A CYCLE
Summary of Contents for BLC10
