Tefcold BLC10, User Manual

Page: 182 / 207

1592006207 XB570L GB r1.1 26.08.2015 XB570L 21/20
Cy4: congelação rápida directa sem retenção
CyS
= tEP iS2 =-18 °C (0 °F) Pd3 = OFF (Desl.)
dbC = não rS2 =-30 °C (-22 °F) dbH = não
iS1 =-18 °C (0 °F) Pd2 =OFF (Desl.) HdS = OFF (Desl.)
rS1 =-30 °C (-22 °F) iS3 =-18 °C (0 °F)
Pd1 = 4,0 rS3 =-30°C (-22°F)
18. VALORES PREFIJADOS DE LOS PARAMETROS
Etiq. Valo Nive Descirpción Rango
SEt 3 - - - Set point -50.0 to 50.0°C
Pr2 - - - Pr1 not used -
Hy 2.0 Pr1 Compressor hysteresis 0.1 to 12.0°C
AC 1 Pr2 Compressor restart delay 0 to 30 min
PAU 0 Pr2 Time of stand by 0 to 60 min
PFt 15 Pr2 Maximum acceptable duration of power failure 0 to 250 min
Con 15 Pr2 Compressor ON time with faulty probe 0 to 250 min
COF 10 Pr2 Compressor OFF time with faulty probe 0 to 250 min
rPo 0.0 Pr2 Thermostat probe calibration -12.0 to 12.0°C
EPP YES Pr2 Evaporator probe presence n; Y
EPo 0.0 Pr2 Evaporator probe calibration -12.0 to 12.0°C
i1P YES Pr2 Insert probe 1 presence n; Y
i1o 0.0 Pr2 Insert probe 1 calibration -12.0 to 12.0°C
i2P n Pr2 Insert probe 2 presence n; Y
i2o 0 Pr2 Insert probe 2 calibration -12.0 to 12.0°C
i3P n Pr2 Insert probe 3 presence n; Y
i3o 0 Pr2 Insert probe 3 calibration -12.0 to 12.0°C
rEM iPt Pr2 Probe selection to stop chilling cycle iPt; rPt
CF °C Pr2 Temperature measurement unit °C; °F
rES dE Pr2 Resolution (for °C): in; dE
Lod rP Pr2 Upper display view rP;EP
rEd rP Pr2 View for rep rP; EP; tiM; i1P; i2P; i3P
d1P cL Pr2 Door switch input polarity OP; CL
odC F-C Pr2 Loads locked by door switch no; FAn; CP; F-C
doA 5 Pr2 Open door alarm delay da 0 a 254 min, 255=nu
dLc Y Pr2 Cycle block with open port n; Y
rrd Y Pr2 Regulation restart after door open alarm n; Y
d2F EAL Pr2 Second digital input function EAL; bAL, ACy
d2P cL Pr2 Digital input polarity OP; CL
did 5 Pr2 Time delay for digital input alarm 0 to 255min
oA1 tMr Pr2 Configuration of first auxiliary relay ALL; Lig; AUS; C2; tMr
oA2 ALL Pr2 Configuration of second auxiliary relay ALL; Lig; AUS; C2; tMr
oA3 Lig Pr2 Configuration of third auxiliary relay ALL; Lig; AUS; C2; tMr
2CH C1 Pr2 Compressor setting during the holding C1; C2; 1C2
OAt 3 Pr2 Second compressor switching on delay 0 to 255 min
OAS 0.1 Pr2 Set point for second compressor -50.0 to 50.0°C
OAH 2.0 Pr2 Differential for second compressor -12.0 to 12.0°C
OAi rP Pr2 Probe selection for second compressor rP; EP; i1P; i2P; i3P
OSt 0 Pr2
Auxiliary output timer
0 to 255 min
OSS 0.0 Pr2 Output set point delta -50.0 to 50.0°C
OSH 2.0 Pr2 Differential for auxiliary output -12.0 to 12.0°C
OSi rP Pr2 Probe selection for auxiliary output rP; EP; i1P; i2P; i3P
tdF rE Pr2 Defrost type rE; in
idF 06:00 Pr2 Interval between defrost cycles 0.1 to 24h00min
dtE 8 Pr2 Defrost termination temperature -50.0 to 50.0°C
MdF 20 Pr2 Maximum length for defrost 0 to 255 min