TEFAL BL542831, Manual

Page: 129 / 136

129
EN
PROBLEMS CAUSES SOLUTIONS
Excessive vibrations
The appliance has not been
placed on a flat surface; the
appliance is not stable. Place your appliance on a
stable,flat heat-resistant, clean,
and dry surface.
Volume of ingredients is
too high. Reduce the quantity of
ingredients processed.
Leak at the top of the
jug.
Overflow sensor (C) is
clogged up.
Clean sensor (C) .
Volume of ingredients is
too high. Reduce the quantity of
ingredients processed.
Poorly-mixed
preparations.
Pieces of food are too large
or too hard. Reduce the size or quantity of
ingredients processed.
Stop the motor using the
motor overload protector.
Leave your product to cool down
for at least 20 minutes and
reduce the size or quantity of
ingredients processed.
Add liquid.
The appliance has cut
the electricity supply.
Appliance is damp.
Leave the appliance to dry for
24 hrs before trying to connect
again.
Your appliance beeps
continuously, all the
LEDs flash and cdE1 or
cdE2 is displayed on
the screen
Fouled up overflow sensor
(C)
Your appliance is equipped
with a level sensor
(C)
.
Clean the sensor (C)
Reduce the quantity of
ingredients.
The food is not properly
cooked or something is
caught at the base of
the jug.
Volume of ingredients is too
great. Do not exceed the maximum level
(fig 3)
of ingredients.
You have not selected the
right programme. Start again, choosing the right
programme.
Not enough or too much
liquid.
Check that the liquid is between
the MIN and MAX levels for
settings P1 and P2
(fig 3) .
For P3, ensure there is between
150ml and 300ml of liquid.
Ingredients not blended
properly. Stir the liquid and ingredients
together manually
(fig 4) .
You have used the appliance
to heat up milk. The soup-maker is not
appropriately-designed to do this.