www.teejet.com
AEROS 9040
U S E R G U I D E
98-01504-ENUS R2 English-US
© TeeJet Technologies 2016
Copyrights
© 2017 TeeJet Technologies. All rights reserved. No part
of this document or the computer programs described in
it may be reproduced, copied, photocopied, translated, or
reduced in any form or by any means, electronic or machine
readable, recording or otherwise, without prior written
consent from TeeJet Technologies.
Trademarks
Unless otherwise noted, all other brand or product names
are trademarks or registered trademarks of their respective
companies or organizations.
Limitation of Liability
TEEJET TECHNOLOGIES PROVIDES THIS MATERIAL
“AS IS” WITHOUT WARRANTY OF ANY KIND, EITHER
EXPRESSED OR IMPLIED. NO COPYRIGHT LIABILITY
OR PATENT IS ASSUMED. IN NO EVENT SHALL TEEJET
TECHNOLOGIES BE LIABLE FOR ANY LOSS OF
BUSINESS, LOSS OF PROFIT, LOSS OF USE OR DATA,
INTERRUPTION OF BUSINESS, OR FOR INDIRECT,
SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES
OF ANY KIND, EVEN IF TEEJET TECHNOLOGIES HAS
BEEN ADVISED OF SUCH DAMAGES ARISING FROM
TEEJET TECHNOLOGIES SOFTWARE.
START SIMPLE GUIDANCE
#1 POWER ON
#2 HOME SCREEN
#3 GO TO CONFIGURATION
1) Set Up the Local Cultural Settings
2) Set Up the GNSS
3) Set Up the Implement
#4 START NEW JOB OR CONTINUE JOB
#5 SET UP GUIDANCE
1) Choose a Guidance Mode
2) Establish an AB guideline
3) Create an Application Boundary
4) Set Up the Mapping Location
ADD RATE CONTROL
ISOBUS UNIVERSAL TERMINAL
