8
www.teejet.com
Aeros 9040 Field Computer
Lateral Implement Offset Adjustment
To calculate an implement offset adjustment using adjacent guidelines:
1. Create a straight AB line.
2. With assisted/auto steering engaged, drive pass
as if you were operating the implement, and place flags at the outside edges of the
implement.
3. Turn around and engage assisted/auto steering on pass
on the adjacent AB guideline. Place additional flags at the outside edges of the
implement or stop while on the AB guideline next to the flags you placed on pass
.
4. Measure the difference
between the flags of pass
and pass
.
5. Divide the measured distance
in half. This difference will be the offset adjustment.
6. Increase or decrease the offset distance
as needed dependent on where the field application overlap occurs and the current implement
offset direction setting.
Field Application
Current Offset Settings
Offset Direction = Left
Offset Direction = Right
Offset Direction = Right
Offset Distance = 0 m
Overlap on the right of pass
or
Gap on the left of pass
Increase distance offset value
Decrease distance offset value
Increase distance offset value
Overlap on the left of pass
or
Gap on the right of pass
Decrease distance offset value
Increase distance offset value
Change to implement offset direction to
left and increase distance offset value
Figure 9: Lateral Implement Offset Distance and Direction
