TechVision NS64P8N8 Manual Download Page 92

Page: 92 / 145

Alarm Management

NVR User Manual

9.5 Alarm Event Notification

9.5.1 Alarm-out

①

Click Start



Settings



Alarm



Event Notification to go to the following interface.

②

Set the delay time and the schedule of each alarm-out. You can click “Edit Schedules” to

edit the schedules (see 7.3.1 Add Schedule for details).

③

Click “Apply” to save the settings. You can click “Test” to test the alarm output.

9.5.2 E-mail

Click Start



Settings



Alarm



Event Notification



E-mail to go to the e-mail configuration

interface. Set the e-mail address of the recipients. See 11.1.5 E-mail Configuration for details.

9.5.3 Display

Click Start



Settings



Alarm



Event Notification



Display to go to the display configuration

interface. Set the duration time of the pop-up video and the pop-up message box. Click
“Apply” to save the settings.

Summary of Contents for NS64P8N8


















































































































































Search results

Summary of Contents for NS64P8N8

Reviews:

Related manuals for NS64P8N8

Brands by name

Popular brands

TechVision NS64P8N8, Manual

Search results

Summary of Contents for NS64P8N8

Reviews:

Related manuals for NS64P8N8

Brands by name

Popular brands