TechVision NS64P8N8 Manual Download Page 88

Page: 88 / 145

Alarm Management

NVR User Manual

②

Enable or disable “Snapshot”, “Push”, “Alarm-out”, “Preset”, “Buzzer”, “Pop-up Video”

and “E-mail”. The alarm handling setting of exception detection alarm is similar to that of the
sensor alarm (see 9.1 Sensor Alarm for details).

③

Click “Apply” to save the settings. You can click “Exception Config” to go to the

exception detection configuration interface.

9.3.3 Tripwire

Line Crossing Configuration

Alarms will be triggered if someone or something crosses the pre-defined alarm line.

①

Click Start



Settings



Camera



Intelligent Analytics



Tripwire to go to the following

interface.

②

Select the camera, enable the line crossing detection and set the duration.

Summary of Contents for NS64P8N8


















































































































































Search results

Summary of Contents for NS64P8N8

Reviews:

Related manuals for NS64P8N8

Brands by name

Popular brands

TechVision NS64P8N8, Manual

Search results

Summary of Contents for NS64P8N8

Reviews:

Related manuals for NS64P8N8

Brands by name

Popular brands