TechVision NS64P8N8 Manual Download Page 91

Page: 91 / 145

Alarm Management

NVR User Manual

sensor alarm (see 9.1 Sensor Alarm for details).

③

Click “Apply” to save the settings. You can click “Intrusion Config” to go to the intrusion

detection configuration interface.

9.4 Exception Alarm

9.4.1 IPC Offline Settings

①

Click Start



Settings



Alarm



Exception



IPC Offline Settings to go to the interface as

shown below.

②

Enable or disable “Snapshot”, “Push”, “Alarm-out”, “Preset”, “Buzzer”, “Pop-up Video”,

“Pop-up Message Box” and “E-mail”. The IPC Offline Settings are similar to that of the sensor
alarm (see 9.1 Sensor Alarm for details).

③

Click “Apply” to save the settings.

9.4.2 Exception Handling Settings

①

Click Start



Settings



Alarm



Exception



Exception Handling Settings to go to the

interface as shown below.

②

Enable or disable “Push”, “Alarm-out”, “Buzzer”, “Pop-up Message Box” and “E-mail”.

The exception handling settings are similar to that of the sensor alarm (see 9.1 Sensor Alarm
for details).

③

Click “Apply” to save the settings.

Summary of Contents for NS64P8N8


















































































































































Search results

Summary of Contents for NS64P8N8

Reviews:

Related manuals for NS64P8N8

Brands by name

Popular brands

TechVision NS64P8N8, Manual

Search results

Summary of Contents for NS64P8N8

Reviews:

Related manuals for NS64P8N8

Brands by name

Popular brands