TechVision NS64P8N8, Manual

Page: 100 / 145

Account & Permission Management NVR User Manual
94
②
Check “Enable” and then choose “Enable Allow List (white list)” or “Enable Block List
(black list)” (the PC client of which the IP address is in the white list can access NVR remotely
while the PC client in the black list cannot).
③
Add IP/IP segment/MAC. Click “Add IP” or “Add MAC” and then check “Enable” in the
popup window (only if you check it can the IP/IP segment/MAC you add be effective). Enter
the IP/IP segment/MAC and then click “OK”. In the above interface, click to edit IP/IP
segment/MAC, click to delete it. Click “Apply” to save the settings.
10.5 Preview On Logout
Click Start

Settings

Account and Authority

Security

Preview On Logout to go to the
following interface.
Set a camera and then enable or disable the preview permission on logout as required. If a
camera’s preview permission on logout is “ON”, you can view the live image of the camera
when the system is logged out, or the live image of the camera cannot be seen when logged
out.
10.6 View Online User
Click Start

Settings

Account and Authority

User Status to view the online user
information (you can view the online user name, login type, IP address and login time; click
to pop up a window showing the preview occupied channel number and playback occupied
channel number).