TechVision NS64P8N8 Manual Download Page 60

Page: 60 / 145

Record & Disk Management

NVR User Manual

Record & Disk Management

7.1 Record Configuration

7.1.1 Mode Configuration

Please format the HDDs before recording (refer to 7.5 Disk Management for details). Click
Start



Settings



Record



Mode Settings to go to the mode settings interface. You can set the

record time under the “Manual Record Settings” and then click “Apply” to save the settings.
There are two record modes: auto mode and manual mode.



Auto Mode

Motion Record

: Motion alarm record will be enabled when motion alarm happens.

Sensor Record

Sensor alarm record will be enabled when sensor alarm happens.

Motion Sensor Record

Motion/sensor alarm record will be enabled when

motion/sensor alarm happens.

Always(24

ⅹ

7) Motion Record

Normal record is enabled all the time; motion alarm

record will be started when motion alarm happens.

Always(24

ⅹ

7) Sensor Record

: Normal record is enabled all the time; sensor alarm

record will be started when sensor alarm happens.

Always(24

ⅹ

7) Motion Sensor Record

Normal record is enabled all the time;

motion/sensor alarm record will be enabled when motion/sensor alarm happens.

Always(24

ⅹ

7) Analytics Record

Normal record is enabled all the time; analytics

record will be enabled when analytics alarm happens.

Summary of Contents for NS64P8N8


















































































































































Search results

Summary of Contents for NS64P8N8

Reviews:

Related manuals for NS64P8N8

Brands by name

Popular brands

TechVision NS64P8N8, Manual

Search results

Summary of Contents for NS64P8N8

Reviews:

Related manuals for NS64P8N8

Brands by name

Popular brands