Technomark Multi4 V3 User Manual Download Page 43

Page: 43 / 85

TRAÇABILITÉ CRÉATIVE

CREATIVE TRACEABILITY

TECHNOMARK

1 Allée du développement

42350 La Talaudière (France)

Tel : +33 (0) 4 77 22 25 91

Fax : + 33 (0) 4 77 22 38 93

E-mail : [email protected]

V : SJ

Le : 20/06/17 R : DD

www.technomark-marking.com

Save

Save

allows saving the file

Enter the file name, enter (if you wish) up to 3 lines of comments and confirm with

This window opens even if the file has already been saved. It allows changing the file name (function:

save under

)

The filename can only contain alphanumeric letters, dashes "-"or underscores "_".

If the file name already exists, a confirmation will be asked:

Confirm with

The folder icon at the bottom right of the window allows you to select the subfolder in which you
want to save the file.

Filename is maximum 19 characters long.

Each comment line can contain up to 31 characters.

Summary of Contents for Multi4 V3






















































































Search results

Summary of Contents for Multi4 V3

Reviews:

Related manuals for Multi4 V3

Brands by name

Popular brands

Technomark Multi4 V3, User Manual

Search results

Summary of Contents for Multi4 V3

Reviews:

Related manuals for Multi4 V3

Brands by name

Popular brands